Laboratory kneader mixer X(S)N-1X(12-58)

Rubber kneader 1 litres Plated with hard Chrome and wear-resistant metal alloy Hard tooth surface reducer ISO Certificate

Features:

1. Rubber or plastic stock can be plasticized or mixed in a closed and pressurized space with the temperature controlled so that the productivity is high and the quality is good and stable.

2. Optimization of the parameters such as the helical angle of rotor wings and the wing overlap length brings about even distribution of the stock.

3. All the parts in contact with stock are ground, plated with hard chrome and polished. The rotor wings are built up by welding with the abrasion-proof sintered carbide to resist abrasion and corrosion.

4. All the parts in contact with stock are of the jacket design where water/steam/medium oil is lead through to provide cooling or heating and can meet different requirements for the rubber or plastic mixing process.

5. Stock is fed through the rear door of the framework (or another port) and discharged by the mixing chamber tilting forward by 140°. Such a design makes it possible to arrange the upstream and the downstream process steps in a line and facilitates stock color changing and the mixing chamber cleaning.

Modle			X(S)N-1×(12-58)
Item
Total volume of mixing chamber		L	3
Working volume of mixing chamber		L	1
Driving motor power		kW	4
Tilting motor power		kW	0.55
Tilting angle		Degree	140
Rotational speed of the rotor (front /rear)		r/min	12~58
Pressure of compressed air		MPa	0.5~0.8
Capacity of compressed air		m3/min	≥0.3
Pressure of cooling water (rubber mixing )		MPa	0.2~0.4
Pressure of heating steam (plastics mixing )		MPa	0.5~0.8
Dimensions	L	mm	1400
	W	Mm	760
	H	Mm	1914
Gross weight		T	~1

Laboratory kneader mixer X(S)N-1X(12-58)